This week shout outs go to Ooznest for quality products and components and also delivery times. Kobra Paints for the sick colour on the frame Trojan engineering in Kent for the frame materials Kent Bearings for the rack and pinion and good customer service source
DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel. By using aluminum tool plate (which is in theory pre-machined
Over the last week I made some modifications to the Solsylva CNC. I wanted to be able to hold a larger trim router as well as incorporate a simple dust shoe. Success! This machine seems to be working very well. Thanks for taking a look. source
Hello, friends in this video a CNC machine processing production. Other than our channel video ➤First video Engine factory mass production in minifac channel https://www.youtube.com/shorts/mlMxtbW8Xek ➤ Second video Cnc router machine hard working in factory (this video) ➤Third video CNC machine working production and manufacturing process CNC router #manufacturing #manufacturingprocess #industry source
This is 3d Waving American Flag, programmed with Vectric Aspire. It was cut on a 15.5″ piece of 2×12. The roughing path was used a 1/4″ end mill. The 3d cut used a 1/4″ ball nose and final pass over the stars used a 1/8″ ball nose. The entire cut was about 2 hrs and
My CNC Chinese spindle arrived for the Rat Rig CNC build that I am doing. Here is me unboxing and taking a first look at it. My thoughts and plans to fix to the Z axis. Also I mention the plan going forward on the CNC (computer numerical control) machine build. Please like and subscribe
Folks loved the first DIY CNC Machine (https://www.youtube.com/watch?v=WKmzlMvxC7I) – now let’s build one bigger and better! Industry grade linear rails combined with a ground ball screw and a TinyG controlled should give us a more rigid and precise machine! We’re going to use two pneumatic cylinders and a pneumatic engraving pen to see if we
In this video I show off the new wood burner I have added to my CNC. I briefly go over the construction of the wood burner mount and show some video of the new tool in action. Hope you enjoy! source
للإشتراك في القناة???????? http://bit.ly/2TWutm5 The work is to Mural of wood decoration by cnc machine Please subscribe to the channel This work is an inscription of the lion tattoo on wood and the used wood is MDF 18 cm thick And this work was done on the CNC router source
Cutting an RC airplane, Extra 300 model. Cut out of 2″ styrofoam. Yes its 2 and a half minutes of silence. ** Update 2018 ** Keep an eye out for my new series coming out. I will be documenting a complete diy CNC build from scratch in detail. Plans will become available as I go