A brief overview of the machine including inside the finished electrical and pump/air solenoid enclosure cabinets followed by some footage of the first part being machined. This part was cut with 12mm DOC, 1mm stepover and 1400mm/min. This was quickly realised to be too slow a feed rate as the machine didn’t seem to be […]
In part 13: – Wiring up the operators control panel – Add an upper limit switch for the Z axis – Add a pneumatic strut to support the Z – First machine movements and backlash testing _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling
This is a video of me tearing my original mini CNC lathe down, both emotionally and literally. I’ve decided that I’m going to take a fresh swing at this project so that you can see the process and so I can have a better lathe at the end. This is the first of 2 or
This time I screw with my balls… This video covers the installation of the ball screws and ball nuts. ______________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much
DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel. By using aluminum tool plate (which is in theory pre-machined
Test showing new product for sale from CNC4YOU.co.uk Stepper and controller our our base models of 3.1Nm 429oz-in and driven by our CW5045 Microstepping driver at 4.2 Amps and 36 Volts. See more at http://www.cnc4you.co.uk/index.php?route=common/home source
I’m quite pleased with this video and the result of quite a bit of work making this motor mount for my DIY CNC router. Link to my build log on mycncuk forum: 3 Axis CNC router http://www.mycncuk.com/threads/4513-3-Axis-CNC-router Thanks to all for your advice on the forum. Link to my website: http://www.jrharris.co.uk/ source
Please feel free to ask questions and leave comments Thanks for watching , please subscribe, thumbs up if you like the video, and most importantly , Be Safe! DON’T CLICK THIS LINK: http://tiny.cc/t8ck5y SUBSCRIBE FOR LATEST VIDEO’S : https://www.youtube.com/channel/UC4EZvvrjdqpATmULrabO0bA?view_as=subscriber Follow me on INSTAGRAM : https://www.instagram.com/cnc4xr7/?hl=en Show support with a pledge: https://www.patreon.com/CNC4XR7 For Plans and other
In this episode I make the X Axis mounting plate for the NEMA 34 Hybrid (closed loop) stepper motor. _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much