Im asking cause i dont really know but why are you using tailstock on this part because it's not so long
I work on Fanuc 18i-TB. Its so easy.
Witam! Czy to nakładka manual guide
R15 G4 r7.5
Half video…
Can u show programme
That lathe is fully automatic?
Seems like a bit of overkill when a plate and a cylinder welded on would do the same thing, but the print is the print and the pay is the same either way.
Can you tell me the G71 type 2 command structure?
I have a goodway from 2005 with manual guide…i have never been able to describe a parting tool with that kind of insert…any tips and tricks?
What kind of runout do you get with that center?
Green paint marker…third shift confirmed.?
Beautiful as always, Chris!
Is the curve toolpath CNC, or manual accordingly do DRO?
Thanks for sharing ?
Lol, I do that same little spirit fingers jazz hands move at 1:07 when I'm manually entering numbers on my machine also.
good video chris maj
Can I ask something as a man who has never used a lathe ; When turning the hollow you worked from right to left on each pass. Is there a reason that you never then cut on the return left to right run?
プーリーの加工めんどくさいよね 掴み代少ないから しかし円のバイトだと綺麗にできるんだなあ
Nice work. The 8mm tool chips so well. I always struggle with the plunge, side turn chip control is not a problem. Did you program the whole thing in conversational programming??. I use solidcam for jobs like this..never really had any experience with conversational. ????
Im asking cause i dont really know but why are you using tailstock on this part because it's not so long
I work on Fanuc 18i-TB. Its so easy.
Witam! Czy to nakładka manual guide
R15
G4 r7.5
Half video…
Can u show programme
That lathe is fully automatic?
Seems like a bit of overkill when a plate and a cylinder welded on would do the same thing, but the print is the print and the pay is the same either way.
Can you tell me the G71 type 2 command structure?
I have a goodway from 2005 with manual guide…i have never been able to describe a parting tool with that kind of insert…any tips and tricks?
What kind of runout do you get with that center?
Green paint marker…third shift confirmed.?
Beautiful as always, Chris!
Is the curve toolpath CNC, or manual accordingly do DRO?
Thanks for sharing ?
Lol, I do that same little spirit fingers jazz hands move at 1:07 when I'm manually entering numbers on my machine also.
good video chris maj
Can I ask something as a man who has never used a lathe ; When turning the hollow you worked from right to left on each pass. Is there a reason that you never then cut on the return left to right run?
プーリーの加工めんどくさいよね 掴み代少ないから
しかし円のバイトだと綺麗にできるんだなあ
Nice work. The 8mm tool chips so well. I always struggle with the plunge, side turn chip control is not a problem. Did you program the whole thing in conversational programming??. I use solidcam for jobs like this..never really had any experience with conversational.
????